Basic Info.
Model NO.
YL-PM-044
Type
Abrasive Belt Grinding Machine
Processing Object
Gear
Abrasives
Abrasive Belt
Controlling Mode
Artificial
Automatic Grade
Automatic
Cylindrical Grinder Type
Universal Cylindrical Grinder
Precision
Precision
Condition
New
Voltage
380V, 50Hz, 3 Phase, 4 Wires
Power
13kw
Motor
5.5kw-4 Phase*1, 4kw-4 Phase*1, 3kw-4 Phase*1
Conveyor Belt Motor Power
2.2kw, RV75, 1:30
Water Pump Power
125W
Conveyor Belt Size
Length 4600* Width 150* Thickness 10mm, Climbing B
Conveyor Belt Speed
0-14 Meter/ Minute
Abrasive Belt Size
2100*150 mm (L*W)
Abrasive Belt Speed
14 M/S
Grinding Area
150*150 mm (L*W)
Trademark
Yi-Liang
Transport Package
Wood Case
Specification
3000*1300*1900 MM (L*W*H)
Origin
China (Mainland), Guangdong
Product Description
Conveyor Abrasive Belt Water Grinding machine
Specification:| Item | Conveyor Water Grinding Machine |
| Type | YL-PM-044 |
| Voltage | 380V, 50Hz, 3 Phase, 4 Wires |
| Power | 13KW |
| Motor | 5.5KW-4 Phase*1, 4KW-4 Phase*1, 3KW-4 Phase*1 |
| Water Pump Power | 125W |
| Conveyor Belt Motor power | 2.2KW, RV75, 1:30 |
| Conveyor Belt Speed | 0-14 Meter/ Minute |
| Conveyor Belt Size | Length 4600* Width 150* Thickness 10mm, Climbing Belt |
| Up & Down Height | 0-80 MM |
| Up & Down Speed | Turn Hand Wheel Each Round Can Up and Down 0.24 MM. |
| Abrasive Belt Size | 2100*150 MM (L*W) |
| Abrasive Belt Speed | 14 M/S |
| Grinding Area | 150*150 MM (L*W) |
| Machine Size | 3000*1300*1900 MM (L*W*H) |
| Water | Inject Two Thirds of Water to The Water Tank |
| Grinding Liquid | 2-3 KG, Cutting and Anti-rust Liquid |
Widely use for all metal flat and plane surface sanding and grinding. Such as stainless steel panel, aluminum board, copper sheet, zinc panel, alloy sheet, brass board, and so on.Feature:
1. One stop finishing from rough grinding to wire drawing finishing.
2. Water grinding can reduce the temperature during sanding, prevent the products to burned and deformation.
3. Grinding liquid is recycling, help to save cost and protect environment.
4. Wide range of uses.
5. High effective.
6. Products quality stable after grinding.
7. Save labor and material cost.
Attention:1. Should use more grinding liquid during grinding iron products to anti rust.
2. The mixing ratio of water and cutting & anti-rust liquid should be 15kg: 1kg. (If exceed this ratio will affect the anti-rust effect.)
3.Products will become thinner and thinner after sanding and grinding. So should adjust the abrasive belt position according to the products.